Dielectric Properties Research Articles

Design synthesis of melamine amino tris-methylene phosphonate modified halloysite nanotubes for epoxy resin with simultaneously improved flame retardancy, dielectric properties and mechanical performance

Design synthesis of melamine amino tris-methylene phosphonate modified halloysite nanotubes for epoxy resin with simultaneously improved flame retardancy, dielectric properties and mechanical performance

Exploring the low-temperature polarization and the multifield-manipulated dielectric tunability behavior of NiMn2O4

Manganese oxides with spinel structure could exhibit abundant physical effects due to the complex sublattice structure, variable valence states and the intricate roles of manganese cations in magnetic interaction. In this work, NiMn2O4 ceramic with space group of Fd3‾m is synthesized. The low-temperature polarization behavior is investigated accompanied by revealing the multi-stage dielectric relaxation. Moreover, the relaxation mechanism is confirmed through microstructure characterization, multiple-condition pyroelectric measurement and the dielectric tunability properties under electric/magnetic fields. With increasing measuring temperature, different relaxation phenomena are respectively induced by lattice distortion because of the competition among magnetic coupling interactions (below ∼135 K), electron hopping relating to the coexistence of different valence states of manganese ions (∼135–230 K), and the synergistic contribution of oxygen vacancies and domain wall effect (above ∼230 K). These results provide additional evidence for comprehensive understanding the low-temperature polarization in NiMn2O4, guiding the method design for exploring the physical origin within a wide temperature range.

Enhancing dielectric properties and thermal stability in microwave-synthesized Nd-modified barium titanate nanoceramics for possible MLCC applications

Enhancing dielectric properties and thermal stability in microwave-synthesized Nd-modified barium titanate nanoceramics for possible MLCC applications

Fixed-Point Atomic Regulation Engineered Low-Thickness Wideband Microwave Absorption.

Atomic doping is widely employed to fine-tune crystal structures, energy band structures, and the corresponding electrical properties. However, due to the difficulty in precisely regulating doping sites and concentrations, establishing a relationship between electricity properties and doping becomes a huge challenge. In this work, a modulation strategy on A-site cation dopant into spinel-phase metal sulfide Co9S8 lattice via Fe and Ni elements is developed to improve the microwave absorption (MA) properties. At the atomic scale, accurately controlling doped sites can introduce local lattice distortions and strain concentration. Tunned electron energy redistribution of the doped Co9S8 strengthens electron interactions, ultimately enhancing the high-frequency dielectric polarization (ɛ' from 10.5 to 12.5 at 12GHz). For the Fe-doped Co9S8, the effective absorption bandwidth (EAB) at 1.7mm increases by 5%, and the minimum reflection loss (RLmin) improves by 26% (EAB = 5.8GHz, RLmin = -46dB). The methodology of atomic-scale fixed-point doping presents a promising avenue for customizing the dielectric properties of nanomaterials, imparting invaluable insights for the design of cutting-edge high-performance microwave absorption materials.

Effect of Carbon dots in tuning molecular alignment, dielectric and electrical properties of a smectogenic cyanobiphenyl-based liquid crystal material

Abstract We demonstrate here the effect of dispersing organosoluble carbon dots (CDs, ∼7-8 nm) on tuning the molecular alignment, dielectric and electrical properties of smectic A (SmA) and nematic (N) mesophases of a thermotropic smectogenic LC material, 4-octyl-4′-cyanobiphenyl (8CB) in a planar anchored ITO sample cell using polarized optical microscopy and dielectric spectroscopic techniques. The cross-polarised optical textures clearly show that the doping of CDs (concentration ≥0.25wt%) in planar anchored 8CB, LC led to change its alignment from planar to vertical. Intrestingly, such induced vertical alignment remains stable throughout SmA and N phases of the 8CB, LC material. Moreover, the magnitude of real dielectric permittivity is found to increase with increasing concentration of CDs and exhibited vertical alignment values for composites (≥0.25wt%). The observance of short axis molecular relaxation for composites (≥0.25wt%) without the application of bias field affirmed again the induced vertical alignment. The accumulation of CDs at the substrate surface and their interaction with alignment and ITO layers could be attributed as an important factor for such induced vertical alignment. Electrical conductivity of 8CB is observed to increase significantly with the addition of CDs (i.e., an increment of up to two orders of magnitude in composites as compared to pure 8CB) and attributed to the lowering of viscosity and change in molecular alignment. We certainly believe that such tunable molecular alignment throughout SmA and N phases of thermotropic smectogenic liquid crystal material (8CB) by dopant CDs could pave the way forward for their applications in the flexible displays, biosensors, electro-optical memory, and other tunable photonic devices.

Temperature-dependent dielectric properties of the Korean lunar simulant and ilmenite: Lunar microwave processing potential

There is increasing interest in the potential application of microwave sintering technology in the construction of infrastructure on the Moon. This study aimed to characterize the dielectric properties of in situ lunar materials; this information is critical for an understanding of the interaction of these materials with microwave and in the application of microwave sintering technology. Dielectric properties including the real and imaginary permittivity, dielectric loss tangent, penetration depth, and electrical conductivity of Korean Lunar Simulant (KLS-1) and ilmenite (an abundant lunar mineral) were investigated at microwave frequencies as a function of temperature. X-ray dispersion (XRD) analyses confirmed that the lattice expansion of minerals with increasing temperature was consistent with an increasing trend in permittivity. The dielectric loss tangent of ilmenite was 2–36 times higher than that of KLS-1, depending on temperature, indicating that ilmenite has greater ability to absorb microwave energy, converting it to heat. Ilmenite demonstrated rapid heating to 1000°C within a few minutes on exposure to 1 kW microwave (2.45 GHz) irradiation. This study provides important information relevant to the development of microwave technology for future lunar applications.

Synergies and applications of polyimides featured low permittivity and high thermal conductivity

Abstract The continuous upgrading of electronic technology has facilitated the integration and miniaturization of electronic and electrical equipment, as well as putting great pressure on the multifunctional demand for internal materials. Developing insulating materials with both low permittivity and high thermal conductivity has become imperative. This perspective focuses on polyimide, which is the top material of the polymer material pyramid, discusses the characteristic parameters that affect its dielectric property and thermal conductivity. A series of basic schemes to regulate the dielectric/thermal properties of polyimide are summarized, revealing the bottlenecks and drawbacks of the current research. Future development trends of polyimides featured low permittivity-high thermal conductivity are anticipated, and novel ideas are proposed for the development of new generation of multifunctional polyimides.

Recent advancements in bio-based dielectric and piezoelectric polymers and their biomedical applications.

The advent of polymer-based dielectrics marked a significant breakthrough in dielectric materials. However, despite their many advantages, they pose serious environmental threats. Therefore, in recent years, there has been growing interest in bio-based polymers as a sustainable alternative to traditional petroleum-based polymers. Their renewable nature and reduced environmental impact can fulfil the rising demand for eco-friendly substitutes. Beyond their ecological benefits, bio-based polymers also possess distinctive electrical properties that make them extremely attractive in a variety of applications. Considering these, herein, we present recent advancements in bio-based dielectric polymers and nanocomposites. First, the fundamental concepts of dielectric and polymer-based dielectric materials are covered. Then, we will delve into the discussion of recent advancements in the dielectric properties and thermal stability of bio-based polymers, including polylactic acid, polyhydroxyalkanoates, polybutylene succinate, starch, cellulose, chitosan, chitins, and alginates, and their nanocomposites. Other novel bio-based dielectric polymers and their distinct dielectric characteristics have also been pointed out. In an additional section, the piezoelectric properties of these polymers and their recent biomedical applications have been highlighted and discussed thoroughly. In conclusion, this paper thoroughly discusses the recent advances in bio-based dielectric polymers and their potential to revolutionize the biomedical industry while cultivating a more sustainable and greener future.

Soft Gel Filler Embedded Elastomer with Surfactant Improved Interface for Dielectric Elastomer Actuators.

Stretchable materials are the foundation of dielectric actuators (DEAs) for artificial muscle. However, the inadequate dielectric constant of stretchable materials has always greatly limited the performance of artificial muscle. Recently, soft fillers have been proposed to improve the dielectric property and preserve the stretchability for softness, aiming to avoid the stiffening effect of traditional rigid fillers. As composites, an amount of interfacial region is generated, which remarkably affects composites' performance from dielectrics to mechanics. Herein, we demonstrate that the size effect, interfacial binding, and compatibility have a great impact on soft filler doped composites. Particularly, according to the liquid characteristics of soft fillers, we explore an interfacial modification method using surfactants. Composite breakdown strength is thus enhanced 2.2-fold from that in the control group due to the reduction of mismatch between fillers and matrix. Moreover, surfactants alleviate the well-known stiffening effect in small fillers. The area strain of the composites reaches 10.3 ± 0.4% at a low electric field of 7 MV/m, and a soft micropump is successfully assembled. These findings demonstrate a unique and combined interfacial influence of soft filler doped elastomer, which promotes the advancements of the dielectric elastomer artificial muscle.

Phononic origin of the infrared dielectric properties of RE2O3 (RE = Y, Gd, Ho, Lu) compounds

Understanding the phononic origin of the infrared (IR) dielectric properties of yttria (Y2O3) and other rare-earth sesquioxides (RE2O3) is a fundamental task in the search of appropriate RE2O3 materials that serve particular IR optical applications. We herein investigate the IR dielectric properties of RE2O3 (RE = Y, Gd, Ho, Lu) using density functional theory-based phonon calculations and Lorentz oscillator model. The abundant IR-active optical phonon modes that are available for effective absorption of photons result in high reflectance of RE2O3, among which four IR-active modes originated from large distortions of REO6 octahedra are found to contribute dominantly to the phonon dielectric constants. Particularly, the present calculation method by considering one-phonon absorption process is demonstrated with good reliability in predicting the IR dielectric parameters of RE2O3 at the far-IR as well as the vicinity of mid-IR region, and the potential cutoff frequency/wavelength of its applicability is disclosed as characterized by the maximum frequency of IR-active longitudinal phonon modes. The results deepen the understanding on IR dielectric properties of RE2O3, and aid the computational design of materials with appropriate IR properties.

Multi-frequency composite wearable antenna for wireless communications

Abstract This paper proposes a multi-band composite wearable antenna for wireless communication, which uses a monopole structure as the radiating body and achieves multi-band characteristics through slit-loading and multi-branching methods. A polymer composite substrate with high dielectric constant and low dielectric loss was prepared using in situ polymerization, and the optimal dielectric constant and loss angle tangent were obtained by controlling the coating ratio of melamine formaldehyde resin (MF) to carbon nanotubes (MWCNTs) and the filler doping rate to achieve miniaturization of the antenna. Comparative experimental results show that the obtained composites have high flexibility and good dielectric properties. The antenna operates in the frequency bands of 2.21-2.52
GHz, 3.07-3.87 GHz, and 4.36-6.03 GHz, which cover the frequency bands of WLAN and WiMAX and 5G applications. The antenna was fabricated and tested, and its performance roughly matched the simulation results. Meanwhile, the antenna has passed the SAR safety test and maintained a stable performance under different curvatures, so it has potential applications in the wireless communication system.

Enhanced Magnetic and Dielectric Properties of YFeO3 Ceramics via Formation of Solid‐Solution with Sr2Bi4Ti5O18 and ZnSnO3 Oxides

In the present investigation, magnetic and dielectric properties of solid‐solution formed between the YFeO3 with the similar crystal structure of other oxide materials are focused on. Orthorhombic crystal structure of YFeO3 (YFO), Sr2Bi4Ti5O18 (SBT), and ZnSnO3 (ZS) nanomaterials are considered to prepare the solid solutions at 1150 °C/3 h. YFO and solid solutions exhibit the orthorhombic crystal structure, which is conformed through Rietveld refinement using X‐Ray powder diffraction pattern. The decreased average grain size is observed for the solid solution (3.0 μm for YFO and ZS and 2.6 μm for YFO and SBT) when compared to YFO (3.4 μm) through scanning electron microscopy. Oxidation state of each atom/ion/element present in the YFO and solid solutions are conformed through X‐Ray photoelectron spectroscopy studies. The solid solution formed between the YFO and SBT exhibits high magnetization value (2.92 emu g−1) and high coercive filed (67.5 Oe) when compared to solid solution formed between the YFO and ZS (magnetization value = 2.48 emu g−1, and coercive filed = 46.4 Oe) and YFO (magnetization value = 1.91 emu g−1, and coercive filed = 61.8 Oe). High dielectric permittivity (εr), low dielectric loss (tan δ), and low conductivity are observed for the solid solution formed between the YFO and SBT, when compared to other materials in this study.

A comprehensive study on crystal structure, phase compositions of the BiVO4-LaVO4 binary dielectric ceramic system and a typical design of dielectric resonator antenna for C-band applications

Novel multi-component (Bi1-xLax)VO4 (BLVOx) (0.05 ≤ x ≤ 0.9) solid-solution/composite ceramics crystal structures, phase compositions as well as its applications in the C-band dielectric resonator antenna have been designed and investigated. With the increased substitution of La3+, phase transitions among the monoclinic scheelite (mBiVO4), tetragonal zircon (zt(La,Bi)VO4) and monoclinic monazite (mLaVO4), driven by the compositional changes, were detected. La3+ played an essential role in the optimization of the dielectric properties of BLVOx. The measured Q × f values at the microwave band are considerably larger around the range of compositions forming the zircon phase and reached the maximum value (12,800 GHz) at pure zircon phase (x = 0.5), demonstrating that the impact of zircon structure on the intrinsic loss should not be disregarded and is beneficial for low dielectric loss. Meanwhile, the εr and TCF values could be tuned by regulating the concentration ratio of Bi3+/La3+ to obtain composites or solid-solutions with appropriate εr and near-zero TCF values. Additionally, a cylindrical dielectric resonator antenna (CDRA) of BVLO0.5 ceramic was designed with high simulated radiation efficiency (99.8%) and gain (4.58 dBi) at the center frequency (6.73 GHz), indicating its potential application in C-band because of its tunable permittivity and low-loss.

Magnetic iron oxide nanoparticle enhanced microwave pretreatment for anaerobic digestion of meat industry sludge

Our study investigates the effects of iron oxide (Fe3O4) nanoparticles combined microwave pretreatment on the anaerobic digestibility and soluble chemical oxygen demand (SCOD) of meat industry sludge. One of our main objectives was to see whether the different microwave-based pretreatment procedures can enhance biogas production by improving the biological availability of organic compounds. Results demonstrated that combining microwave irradiation with magnetic iron oxide nanoparticles considerably increased SCOD (enhancement ratio was above 1.5), the rate of specific biogas production, and the total cumulative specific biogas volume (more than a threefold increment), while having no negative effect on the biomethane content. Furthermore, the assessment of the sludge samples’ dielectric properties (dielectric constant and loss factor measured at the frequency of 500 MHz) showed a strong correlation with SCOD changes (r = 0.9942, R2 = 0.99), offering a novel method to evaluate pretreatment efficiency.

Temperature dependency of impedance, dielectric, and conductivity properties for Si-p/beta-FeSi2-n heterostructures created through facing target sputtering

To connect thermal dependency with Si-p/beta-FeSi2-n heterostructure efficiency, this work explored the impedance characteristics accompanied by dielectric and conductivity properties under different temperatures of 160–400 K. The Nyquist impedance plots for the heterostructures showed a semicircular arc that shrank as the temperature increased. These can be equivalently interpreted as a loop of single resistance paralleled to single constant phase element representing the heterostucture which also paralleled to inductive elements representing the inductive effect, serially connected to electrode resistance. The dielectric properties implied a shift in behavior for the relaxation process since donor-acceptor deionization occurred when the temperatures reached 320 K or higher due to shorter relaxation time and higher thermal dissipation. The conductivity properties indicate that the transport mechanism at 180 K or lower involves a prolonged transitional movement before transitioning into localized hopping at higher temperatures, corresponding to faster carrier movement. The relaxation and activation energy of the heterostructure reveal drastic transition of the energy from a low temperature of 160–240 K to a higher temperature of 320–400 K, where the electrical mechanism of the heterostructures become highly dependent on the temperature likely due to the high carrier density based on unevenly high activation energy.

Unveiling the transition of tumbling and tank-treading dynamics of star-shaped polyelectrolytes in shear flow by modulating the solution's dielectric properties.

The effects of the solution's dielectric properties on the conformation and dynamics of star-shaped polyelectrolytes in shear flow are investigated using a hybrid simulation method coupling multi-particle collision dynamics and molecular dynamics. The simulation results showed that by modulating the dielectric properties of the solution, star-shaped polyelectrolytes showed a three-step dynamic behavior transition from tumbling to tank-treading to tumbling dynamics under shear flow. The analysis indicated that this distinct transition in dynamics could be attributed to the uneven distribution of counterions induced by shear on the chain, resulting in a change in the polyelectrolyte conformation and degree of segmental alignment in arms. These findings contribute to a comprehensive understanding of the non-equilibrium dynamics of star-shaped polyelectrolytes in shear flow and offer a viable approach for controlling the dynamic behavior of star-shaped polyelectrolytes by adjusting the dielectric properties of the solution.

Investigation on the Dielectric Properties of PVDF-Matrix Composite Films Containing Functionalized Graphene

Investigation on the Dielectric Properties of PVDF-Matrix Composite Films Containing Functionalized Graphene

Effect of polymer concentration and cross-linking density on the microstructure and properties of polyimide aerogels

AbstractPolyimide aerogels display excellent mechanical strength, high thermal stability, low thermal conductivity, and outstanding dielectric properties. Typically, the synthesis of polyimide aerogels involves the polycondensation of dianhydride and diamine into poly(amic acid) (PAA) oligomers, which are then cross-linked and chemically imidized into polyimide. The stoichiometry of dianhydride and diamine determines the number of repeat units and length of the PAA oligomers, which in turn determines the cross-linking density. Despite the critical role of polymer concentration and number of repeating units in determining the microstructure and properties of polyimide aerogels, few detailed studies exist on these two parameters. Here, we synthesized and characterized 16 polyimide aerogel formulations from the common monomers biphenyl-3,3′,4,4′-tetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA), with different repeat units (n = 5, 15, 30, 45) and total polymer concentrations (4, 7, 10, 13 wt%). An increased polymer concentration accelerated gelation and enhanced the mechanical performance of aerogels, but surprisingly, it also led to higher volumetric shrinkage during aging, solvent exchange, and supercritical drying (SCD). Specific surface areas (SSAs) reached a maximum at intermediate polymer concentrations. A shorter oligomer chain length, i.e., a higher cross-linking density, led to moderately higher SSAs (between 320 and 400 m2/g) and reduced shrinkage, resulting in lower densities for a given polymer concentration. The density dependence of the thermal conductivity exhibits a pronounced U-shaped curve with a minimum in thermal conductivity of 21–23 mW/(m·K) between 0.080 and 0.120 g/cm3, with somewhat lower values for more highly cross-linked aerogels. This systematic study of polyimide aerogels forms the basis for designing polyimide aerogels with tailored properties for targeted applications. Graphical Abstract

Achieving Enhanced Dielectric and Energy Storage Performance in Poly(vinyl chloride-glycidyl methacrylate) through Tuning Interchain Interactions.

Glassy polymer dielectrics exhibit significant advantages in energy storage density and discharge efficiency; however, their potential application in thin-film capacitors is limited by the complexity of the production process, rising costs, and processing challenges arising from the brittleness of the material. In this study, a small amount of the polar monomer glycidyl methacrylate (GMA) was copolymerized with vinyl chloride (VC) using a highly integrated and precisely controlled process. This effectively facilitated the bulk synthesis of P(VC-GMA) copolymers, aimed at enhancing the dielectric properties and energy storage capabilities of the copolymer. Moreover, the incorporation of GMA into PVC induces significant alterations in the structural sequence of the copolymer, resulting in an enhancement of interchain interactions that ultimately contribute to an increase in the modulus and improved breakdown strength. With a GMA content of 2.4 mol %, P(VC-GMA) exhibits a significant enhancement in discharge energy density, surpassing that of a pure PVC copolymer, while maintaining high discharge efficiency and stability. The finding of this study paves the way for future advancements in high-energy-storage polymer dielectrics, thereby expanding the scope of advanced dielectric materials.

Synthesis of flowerlike vanadium diselenide microspheres for efficient electromagnetic wave absorption

The revelation of MoS2 as an efficient electromagnetic wave (EMW) absorbing material has ratcheted up people’s attention to other transition metal dichalcogenides (TMDs). To date, extensive studies have been conducted on the semiconducting VIB-Group TMDs while research into metallic VB-Group TMDs has been relatively rare. In this work, we successfully fabricated VB-Group VSe2 microspheres through a facile one-step hydrothermal method and used them as EMW absorbers. The flowerlike VSe2 microspheres based on VSe2 nanosheets exhibited a minimum reflection loss of 46.58 dB with an effective absorption bandwidth of 4.86 GHz. The influence of material morphology, microstructure, and dielectric properties on the EMW absorption performance was systematically investigated. The hierarchically layered structure promoted dielectric loss and EMW absorption by means of multiple reflection, interfacial polarization and related relaxation, and enhanced attenuation ability. This work not only demonstrates that VSe2 is potentially a high-efficiency single component EMW absorber, but also provides fresh insights into exploration on the EMW loss mechanisms of the metallic TMD-based absorbing materials.